LOCTITE 424 - 20 G, INSTANT ADHESIVE
Loctite 424 provides the best results on EPDM and other elastomers. It can also bond rubber, plastics, and metals. It fixes very quickly. Bonds in thin gaps within seconds. Loctite 424 is resistant to gasoline and motor oils.
LOCTITE 424 - 20 G, INSTANT ADHESIVE
Description
Description
Technical parameters:
Viscosity: 100 [mPa.s]
Maximum gap: 0.10 [mm]
Temperature resistance: -40 to +80 [°C]
Adhered materials: steel, aluminum, zinc dichromate, neoprene, rubber, nitrile, ABS, PVC, polycarbonate, and more.
Shear strength [N/mm2]:
On steel: 18 - 2
On ABS: 6 - 20
On polycarbonate: 5 - 20
Fixation speed [s]:
On steel: 15 - 30
On ABS: 2 - 10
On polycarbonate: 15 - 50
Properties:
Technology: cyanoacrylate
Appearance: transparent, clear to straw-yellow liquid
Components: single-component
Viscosity: low
Curing: moisture
Application: bonding
Instructions for assembly, disassembly, and cleaning can be found in the product's technical data sheet. Safety data sheet for Loctite 424 available upon request.
Not recommended:
to be used in pure oxygen or oxygen-rich systems and should not be used for sealing chlorine or other strongly oxidizing materials.
For best bonding results, the surfaces to be bonded should be clean and degreased.
To accelerate curing (due to large gaps between bonded parts), it is recommended to use a suitable activator. However, this may result in reduced final strength of the bonded joint (testing required to verify the result).
